[Updated May 2023] Windows Error Code 0x80070570 Repair Guide

The Windows Error Code “0x80070570” is a standard error that appears on Windows 10 devices, and it has also been found to occur on devices that run older Windows Operating System versions.

This 0x80070570 error message commonly occurs when updating or installing Windows. The Windows error code 0x80070570 also occurs when transferring data from one drive to another.

The notification message that comes with the 0x80070570 error code will depend on the exact cause of the error message, as it usually outlines the problem in depth.

Here are some examples of the error messages that may come together with the Windows error code 0x80070570:

• Error 0x80070570: The file or directory is corrupted and unreadable
• Windows update KB3116908 failed to install error 0x80070570
• Windows cannot install the required files 0x80070570

Even if it’s tough to pinpoint the exact cause, it’s worth trying all of these possible fixes until you find one that works.

Windows Error 0x80070570 Troubleshooting Methods

Windows users with considerable computer skills may be able to manually perform troubleshooting methods to resolve the problem caused by this code. In contrast, others may prefer to employ a professional to handle the task. However, any modifications to Windows system settings risk causing Windows to mess up more.

Suppose you are unsure about troubleshooting or do not have the time to tinker with your Computer. In that case, we suggest using a third-party system repair tool such as Fortect.

Automatic Repair: Fortect System Repair Tool

Fortect is an automatic system repair and virus removal tool for Windows, and it offers a thorough system diagnosis in a short amount of time. As a result, users can enjoy robust system optimization, protection against malware and other forms of online threats, and a clean system.

When a computer exhibits Windows errors or problems, most people will attempt to install the required files for Windows on their Computer. While this is a tried-and-true method of optimizing computer performance, it can also result in losing important data and settings.

Fortect offers various system repair services, including system scans and security. Fortect is a tool that even the most novice PC users can use to save time, effort, and data.

If you are experiencing any of the below situations, then you should consider using Fortect:

• You want to avoid downloading registry cleaners and system optimizers
• You want to find out if you have malware issues
• You are unable to use your Windows installation disk
• You don’t want to waste time moving and saving files – or worse losing them altogether
• I don’t want to go through the lengthy figuring out manual fixes
• If you need the utmost customer service

To install Fortect, follow these steps:

1. Download and install Fortect:

2. Once Fortect has been installed on your Windows PC, you will be directed to the homepage. Click on Start Scan to let Fortect analyze what needs to be performed on your Computer.

3. Once the scan is complete, click Start Repair to fix any issues or update your Computer’s outdated drivers or system files.

4. After Fortect has completed the repair and updates on the incompatible drivers or system files, restart your computer and see if the drivers or system files in Windows have been updated successfully.

Manually Fix the Windows Error Message 0x80070570

Manually performing troubleshooting methods to try and fix the Windows error code 0x80070570 may take more time and effort, but it would be an excellent way to learn about your Computer. Additionally, you could potentially save money by fixing it yourself.

First Method – Reboot Your Computer

Rebooting a computer frequently resolves odd technical issues and should always be the first step. Before doing so, save all documents and terminate any running applications or programs; doing this will not lose any of your important files or progress.

Second Method – Run Windows Update

After rebooting your Computer, it would be best to check for Windows updates. The Windows Update tool can automatically download and install required files for Windows. The Windows update tool will also install other updates, such as bug fixes, necessary software updates, and security updates.

1. Press the “Windows” key on your keyboard and press “R” to bring up the run line command type in “control update,” and press enter.

2. Click on “Check for Updates” in the Windows Update window. If no updates are available, you should get a message saying, “You’re Up to Date.”

3. If the Windows Update Tool finds a new update for your Computer, let it install the required files automatically and wait for it to complete. You may be required to restart your Computer to install new updates.

Third Method – Run Windows Startup Repair

The Windows Startup Repair tool is designed to fix damaged or missing system files that might cause Windows to stop working correctly, such as the Windows error code “0x80070570.”

1. Press the Shift key down and simultaneously press the Power button on your keyboard.
2. It would be best if you continued holding down the Shift key while waiting for the machine to power up.
3. Once the Computer starts, you’ll find a screen with a few options. Click Troubleshoot.
4. Next, click on Advanced options.
5. In the Advanced options menu, click Startup Repair.

6. Once the Startup Repair screen opens, choose an account. Be sure to use an account with Administrator access.
7. After entering the password, click Continue. And wait for the process to complete.

Fourth Method – Run the Windows System File Checker (SFC) and Deployment Image Servicing and Management Tool (DISM)

The Windows SFC is a built-in tool in Windows that scans for damage in system files. The SFC (System File Checker) analyzes the stability of all secured Windows system files and updates outdated, corrupted, modified, or broken versions with proper ones.

If the damage cannot be repaired, DISM should correct as many faults as feasible. The DISM tool can scan and revise Windows images and modify Windows installation media.

1. Hold down the “Windows” key and press “R,” and type “cmd” in the run command line. Hold both the “ctrl and shift” keys together and hit enter. Click “OK” on the next window to grant administrator permissions.

2. Type “sfc /scannow” in the CMD window and hit enter. SFC will now check for corrupted Windows files. Wait for the SFC to complete the scan and restart the Computer. Once done, run the Windows Update tool to check if the issue has been fixed.

3. Once the scan is complete, make sure to restart your Computer.

Steps for Performing a Deployment Image Servicing and Management (DISM) Scan:

1. Hold down the “Windows” key and press “R,” and type “cmd” in the run command line. Hold down both the “ctrl and shift” keys together and press enter. Click “OK” on the next window to grant administrator permissions.

2. The command prompt window will open, type in “DISM.exe /Online /Cleanup-image /Restorehealth” and then hit “enter.”

3. The DISM utility will start scanning and fixing any errors. However, if the DISM cannot acquire files from the internet, try to use the installation DVD or bootable USB drive.
4. Insert the media and type the following commands: DISM.exe/Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccess

Note: Replace “C: RepairSourceWindows” with the path of your media device

Fifth Method – Run the Windows CHCKDSK Tool

Windows Check Disk is a built-in tool on Windows that lets you scan system files on your Computer and automatically attempt to repair any issues found within the hard drive. You can perform this step without accessing the advanced startup to boot to safe mode and just run it in standard Windows mode.

It is possible that some of your system files got corrupted during use or while updating Windows.

Follow the steps below to run Windows Check Disk on your hard drive.

1. Press Windows key + S and search for Command Prompt on your Computer.
2. Now, click on Run as Administrator to launch Command Prompt with administrative privileges.

3. Lastly, type chkdsk /r and hit Enter.

4. Now, Windows Check Disk will attempt to repair all the broken files on your Windows computer. Wait for the process to complete, then restart your Computer and use it usually to see if the Windows installation 0x80070570 error still occurs.

Sixth Method – Manually Restart the Windows Update Services Through CMD

Although Windows 10 has quickly gained popularity, it is far from a flawless operating system. It’s possible that some of its features won’t perform as expected, resulting in error messages like the Windows error code 0x80070570 when you install Windows and try to install the required files. Resetting the Windows Updates Components is one of the best ways to resolve this in this instance.

1. Hold down the “Windows” key and press the letter “R,” and type in “cmd” in the command line. Press down on both the “ctrl and shift” keys simultaneously and click “OK.” Select “OK” to grant administrator permission on the following prompt.

2. Type in the following individually and hit enter after entering each command.

• net stop wuauserv
• net stop cryptSvc
• net stop bits
• net stop msiserver
• ren C:\\Windows\\SoftwareDistribution SoftwareDistribution.old
• ren C:\\Windows\\System32\\catroot2 Catroot2.old

Note: Both of the last two commands are only used to rename the Catroot2 and SoftwareDistribution folders

3. Next, you will have to delete files by performing the following steps. In the same CMD window, type in the following commands and hit enter after each command:

• Del “%ALLUSERSPROFILE%ApplicationDataMicrosoftNetworkDownloaderqmgr*.dat”
• cd /d %windir%system32

4. After entering the above-mentioned commands, we will now have to restart all the Background Intelligent Transfer Service (BITS) through the same CMD window. Remember to hit enter after typing in each command.

• regsvr32.exe oleaut32.dll
• regsvr32.exe ole32.dll
• regsvr32.exe shell32.dll
• regsvr32.exe initpki.dll
• regsvr32.exe wuapi.dll
• regsvr32.exe wuaueng.dll
• regsvr32.exe wuaueng1.dll
• regsvr32.exe wucltui.dll
• regsvr32.exe wups.dll
• regsvr32.exe wups2.dll
• regsvr32.exe wuweb.dll
• regsvr32.exe qmgr.dll
• regsvr32.exe qmgrprxy.dll
• regsvr32.exe wucltux.dll
• regsvr32.exe muweb.dll
• regsvr32.exe wuwebv.dll
• regsvr32.exe atl.dll
• regsvr32.exe urlmon.dll
• regsvr32.exe mshtml.dll
• regsvr32.exe shdocvw.dll
• regsvr32.exe browseui.dll
• regsvr32.exe jscript.dll
• regsvr32.exe vbscript.dll
• regsvr32.exe scrrun.dll
• regsvr32.exe msxml.dll
• regsvr32.exe msxml3.dll
• regsvr32.exe msxml6.dll
• regsvr32.exe actxprxy.dll
• regsvr32.exe softpub.dll
• regsvr32.exe wintrust.dll
• regsvr32.exe dssenh.dll
• regsvr32.exe rsaenh.dll
• regsvr32.exe gpkcsp.dll
• regsvr32.exe sccbase.dll
• regsvr32.exe slbcsp.dll
• regsvr32.exe cryptdlg.dll

5. Once all the commands for each Windows update service have been entered, we need to reset the Windows Socket by typing in the following command. Once again, make sure to hit enter after entering the command.

• netsh winsock reset

6. Now that you have stopped the Windows Update services turn it back on to refresh it. Type in the following commands in the CMD window.

• net start wuauserv
• net start cryptSvc
• net start bits
• net start msiserver

7. Close the CMD window and restart your Computer. Once your Computer is back on, run the Windows updates to see if the “Your Device Is Missing Important Security and Quality Fixes” error message has been fixed.

Seventh Method – Replace Your Hard Disk Drive (HDD) or Solid-State Drive (SSD)

If the methods mentioned above do not resolve the Windows error 0x80070570, you should consider replacing your Computer’s hard drive since it may be defective or damaged.

You should remove your hard disk from the Computer and insert it into another device to read the data on the hard drive and check if that Computer starts from the hard drive. If the newly connected Computer can read the drive without encountering the Windows error code 0x80070570, the problem is most likely caused by the SATA cable rather than the HDD itself.

We strongly suggest replacing the SATA cable, which connects the hard drive to the Computer’s motherboard.

Final Words

At first, glance, getting any system faults, such as Windows Error Code 0x80070570, corrected as soon as possible is crucial to saving your machine. Remember that your hard drive contains all your essential files and data, and leaving it unchecked raises the risk of losing everything.

In other words, if you notice that you are receiving the Windows Error Code 0x80070570, proceed immediately to perform any of the troubleshooting solutions we have suggested.

Frequently Asked Questions About Error 0x80070570