How to Fix the “Startup Repair Couldn’t Repair Your PC” in Windows 10

How to Fix the “Startup Repair Couldn’t Repair Your PC” in Windows 10

/ Shayne Sherman

This issue indicates that the Windows Recovery utility cannot repair errors that it has detected. This occurs when your storage device storing the Operating System has a corrupt file or a faulty sector. As a result, your startup repair couldn’t repair your PC.

However, several other factors can contribute to the startup automatic repair issue. So, let’s look at some of the most typical causes and some potential solutions to this problem.

Possible Causes of ‘Startup Repair Couldn’t Repair Your PC’

If you are ever getting an automatic ‘Startup Repair Couldn’t Repair Your PC’ error, it is crucial to understand where this problem could be rooted. Understanding the cause will help you combat these technical errors faster.

Furthermore, you might also encounter the error “Automatic Repair Couldn’t Repair Your PC” which is essentially the same automatic startup repair error.

Here are some other possible causes of ‘Startup Repair Couldn’t Repair Your PC’:

  • There are corrupted system files on the Operating System.
  • Bad sectors in the hard drive.
  • Hardware Failure (RAM or hard drive).
  • Not enough RAM or storage is available for new updates/fixes from the Windows update.
  • The computer was powered off either accidentally or deliberately during an installation of a Windows update.
  • The primary boot partition has corrupted malware, causing the “Automatic Repair Startup” to stop.

Common Symptoms of ‘Startup Repair Couldn’t Repair Your PC’

According to multiple Windows users, they encounter the following symptoms when they get the ‘Startup Repair Couldn’t Repair Your PC’ message:

  • Windows Automatic Repair Failed – Startup Repair is meant to enable you to resolve some errors; however, it does not always work. On occasion, you may see a notice with a blue screen stating that Windows 10 Automatic Repair was unable to repair your computer.
  • Looping Startup Repair Message – When the Windows 10 Startup Repair process becomes stuck, it’s referred to as the “Startup Repair Stopped Working” loop. When Windows 10 encounters this issue, it will repeatedly boot into Startup Repair and offer an unending loop, preventing you from accessing anything else on the machine.

The Startup Repair Tool

The Windows startup repair tool diagnoses your PC to look for disk errors. This is one of the best recovery tools included in your Windows 10. You need to click on Advanced options > Troubleshoot > Startup Repair to run startup repair.

Windows Automatic Repair Tool

Windows 10
System Information
  • Your machine is currently running Windows 10
  • Restoro is compatible with your operating system.

Recommended: To repair Windows 10 Errors, use this software package; Restoro System Repair. This repair tool has been proven to identify and fix these errors and other Windows problems with very high efficiency.

Download Now
Restoro System Repair
Norton Digicert
  • 100% safe as confirmed by Norton.
  • Only your system and hardware are evaluated.

Troubleshooting Methods to Fix the ‘Startup Repair Couldn’t Repair Your PC’

It’s hard to pinpoint the cause of this issue with the automatic Startup Repair utility. We strongly suggest following our troubleshooting methods from the top and just working your way down the list.

First Method – Reboot Your Computer to Start Fresh

Your system will function more smoothly if you restart it once in a while. In addition, it clears out temporary files and memory, restarts the Windows update service and its components, and halts any processes that are consuming a lot of RAM. Trying this simple method may quickly fix startup repair issues.

Even after you have closed an application, it can still access your memory. Restarting the machine may also resolve Windows device and hardware issues and the ‘Startup Repair Couldn’t Repair Your PC’ error. If you’re using a VPN, you may disable it by restarting your computer or going into the settings app. If your system is still operating terribly, you may be able to benefit from this one simple secret tip.

Second Method – Boot Device Through Safe Mode

You can fix the automatic repair loop through safe mode. When using safe mode, the rest of your device and your driver will not run except for specific parts like the display and mouse drivers, similar to the Windows Recovery Environment. As a result, this will bypass automatic repair and is one of the best ways to run startup repair automatically.

To start your PC in safe mode, follow these steps.

  1. Click Troubleshooter on Advanced Options.
  2. Select Advanced Option. Next, choose Startup Settings.
automatic repair
  1. Click Restart Button.
  2. Once your PC starts, you will be able to see multiple options for safe mode.
startup settings enable safemode

Third Method – Disable the Windows Automatic Restart Feature

Disable the Automatic startup repair feature to fix startup repair fails. By turning this feature off, your PC will stop Windows from restarting your computer when it encounters an error.

  1. Reboot your computer. If you don’t see the blue screen with the “Startup Settings” appear on your screen and go directly to your desktop, follow the steps below.
  2. Press the Shift key down and simultaneously press the Power button on your keyboard.
  3. You need to continue holding down the Shift key while waiting for the machine to power on.
  4. Once the computer starts, you’ll find a screen with a few options. Select Troubleshoot.
  5. Next, click on Advanced options.
automatic repair 1
  1. In the Advanced options menu, click Startup Settings.
  2. Select the “Disable Automatic Restart After Failure” by pressing the number 9 key on your keyboard.
  3. Your computer will automatically restart, and the Startup Repair loop should no longer be there.

Fourth Method – Perform a Fix Boot and Check Disk Scan

A faulty boot partition might cause the Windows 10 Startup Automatic Repair loop. You can use chkdsk to scan and fix corrupted files and the boot volume:

  1. Reboot your computer. If you don’t see the “Startup Settings” appear on your screen and go directly to your desktop, follow the steps below.
  2. Press the Shift key down and simultaneously press the Power button on your keyboard.
  3. You need to continue holding down the Shift key while waiting for the machine to power on.
  4. Select the “Advanced Options” button and click on “Command Prompt.”
automatic repair 1
  1. In the Command Prompt window, type in the following command. Make sure to press “enter” after typing in the command.
  • bootrec.exe /rebuildbcd | bootrec.exe /fixmbr | bootrec.exe /fixboot
  1. Type in the following commands to run the Check Disk scan.

chkdsk /r c:

chkdsk /r d:

Keep in mind to utilize the letters that correspond to your PC’s hard drive partitions.

  1. This is only an example; remember that you must run the chkdsk command for each hard disk partition.
  2. Close the command prompt.
  3. Finally, restart your computer and confirm if this process fixes automatic startup repair fails.

Fifth Method – Run the Windows System File Checker (SFC) and Deployment Image Servicing and Management Tool (DISM Tool)

You can disable automatic startup repair by running SFC Checker. Windows SFC is a built-in program in Windows that analyzes system files for damages. The SFC (System File Checker) checks the integrity of all protected Windows system files and replaces those that are obsolete, corrupted, changed, or broken with newer versions. If the harm is irreversible, DISM should fix as many flaws as possible. In addition, the DISM program may examine and edit Windows images and change Windows installation media discs.

  1. Hold down the “Windows” key or Windows logo on your keyboard and press “R,” and type “cmd” in the run command prompt. Hold both the “ctrl and shift” keys together and press enter. Click “OK” on the next window to grant administrator permissions.
run cmd
  1. Type “sfc /scannow” in the command prompt and hit enter. SFC will now check for corrupted Windows files. Wait for the SFC to complete the scan and restart the computer. Once done, run the Windows Update tool to check if the issue has been fixed.
sfc scannow
  1. Once the scan is complete, make sure to restart your computer.

Steps for Performing a Deployment Image Servicing and Management (DISM) Scan

  1. Select the command prompt by holding down the “Windows” key and pressing “R,” and typing “cmd” in the run command line. Hold both the “ctrl and shift” keys together and press enter. Click “OK” on the next window to grant administrator permissions.
run cmd
  1. The command prompt window will open, type in “DISM.exe /Online /Cleanup-image /Restorehealth” and then hit “enter.”
dism restorehealth
  1. The DISM utility will start scanning and fixing any errors. However, if the DISM cannot acquire files from the internet, try to use the media creation tool, installation DVD, or bootable USB drive. Insert the media and type the following commands: DISM.exe/Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccess

Note: Replace “C:RepairSourceWindows” with the path of your media device

  1. Check if this process can fix the automatic repair loop.

Sixth Method – Repair the Boot Configuration Data (BCD)

The Boot Configuration Data (BCD) file contains boot configuration settings that specify how Windows should startup. Windows will not boot if the BCD file is corrupt. The only solution for this type of error is to fix the boot section.

  1. Restart your computer. If you don’t see the “Startup Settings” appear on your screen and go directly to your desktop, follow the steps below.
  2. Press the Shift key down and simultaneously press the Power button on your keyboard.
  3. You need to continue holding down the Shift key while waiting for the machine to power on.
  4. Select the “Advanced Options” button and click on “Command Prompt.”
automatic repair 1
  1. In the Command Prompt, type in the following lines: “bootrec /rebuildbcd” and press “Enter.” After the complete process, type in “bootrec /fixmbr” and press “Enter.”
  2. Lastly, type in “bootrec /fixboot” and press “Enter.” After you rebuild BCD, Restart your computer to see if the problem has already been fixed.

Seventh Method – Restore the Windows Registry

You might experience Windows 10 Automatic Repair problem due to an incorrect registry value. Check to see whether restoring the registration is of any help.

  1. Press the Shift key down and simultaneously press the Power button on your keyboard.
  2. You need to continue holding down the Shift key while waiting for the machine to power on.
  3. Select the “Advanced Options” button and select “Command Prompt.”
automatic repair 1
  1. Type in the following command in the Command Prompt:

c:\windows\system32\config\RegBack\* c:\windows\system32\config

  1. You’ll be prompted to decide whether you want to overwrite all files or only a portion completely. You should write All into the Command Prompt and press the Enter key.
  2. Restart your PC to see if this fixed the Windows 10 automatic repair loop issue.

Eight Method – Reset Windows to Factory Settings

If your machine still boots up normally, you can reset Windows 10 without the need for a disk by completing the instructions below.

  1. Press on the Windows key + I to open Windows Settings.
windows button i key
  1. Next, select Update & Security.
windows update and security
  1. Inside Update & Security, click on Recovery.
  2. Now, under ‘Reset this PC,’ click on Get Started.
windows recovery
  1. Lastly, select ‘Remove Everything’ and hit Reset to begin the process.

Ninth Method – Disable Early Launch Anti Malware Protection

Having antivirus software may cause this problem with the automatic startup repair. Temporarily turning off your Malware product may help.

  1. Select Troubleshooter on Advanced Menu.
  2. Choose Advanced Option, then Startup Settings.
  3. Click Restart.
  4. Once your PC starts, you will see several options from 1 – 9. Press 8 or F8 to Disable Early launch anti-malware protection.
  5. After performing these steps, restart your computer and check if this fixed the boot error.

Final Words

Make a recovery disk and a Windows 10 repair CD right away to ensure that you are prepared if your operating system fails. This will help you be ready for a system restore, resolve issues and avoid problems in the future. Also, please take a look at our other troubleshooting guide to keep your PC in good working order.

Shayne Sherman
Meet the author

Shayne is an expert at all things Microsoft Windows and computer security. As a Windows user of over 30 years, he has been featured on Business Insider, Yahoo, Tech Republic, Hacker Noon, Techopedia, and many other publications. He also enjoys spending time with his family, including his English bulldog, Fergie as well as entertaining at his home theater.