How to Fix the Windows Error Code “0x80070057”

How to Fix the Windows Error Code “0x80070057”

/ Sed Galope

The Windows error code 0x80070057 can be a frustrating and confusing issue to deal with. This error can occur when there is a problem with the configuration of your system, and it can prevent your computer from functioning properly.

This guide will explore some of the common causes of the error and provide step-by-step instructions on how to fix it.

Automatically Repair Windows Errors

Recommended: To easily install drivers automatically, use the tool below.

Download Now
Fortect System Repair

Why Does the Windows Error Code “0x80070057” Occur

If you get error number 0x80070057, your storage device has failed, be it a traditional hard drive or a more modern Solid State Drive. This could be because you tried to install or store a file or application that is too big for the device and ran the space on the drive is not enough, because you tried to copy things to the disk, and they ran out of room, corrupt or Windows registry entry.

This error message is also commonly seen when Windows is being installed. Error code 0x80070057 may happen if the storage device you are using does not have sufficient capacity or does not use the appropriate version of the system for Windows that you are attempting to install.

Your hard drive may also have a corrupt partition if it is ancient or you’ve been changing its partitions. 

We have also heard less severe occurrences of the error number 0x80070057 showing up, such as when a new profile is created in Microsoft Outlook. Other programs seem more prone to this issue than others, although, in theory, any application can cause it if you’re short on space or there’s a problem with the disk itself.

Different Manifestations of the Error 0x80070057 in Windows

Depending on the severity of the issue, the 0x80070057 error could show up on a Blue Screen of Death (BSOD) or display as a white pop-out window. Although it isn’t as severe as some other problems that Windows is susceptible to, it will prohibit you from doing your tasks.

Because error number 0x80070057 is commonly associated with storage issues, it appears when you try to install a new program or download Windows update files. It may also display if you switch to Windows 10 from a previous version of the Windows Operating System, such as Windows 8 or 7.

However, you don’t have to be near Windows 10 to get the error code 0x80070057 or other unknown errors. It’s been seen in some form or another since Windows 7.

Troubleshooting the Error 0x80070057 in Windows

Although the specific source of error 0x80070057 in Windows isn’t always known, you can try a few possible solutions. These are arranged in order of difficulty and time commitment, so even if the first troubleshooting methods appear a little basic or you don’t believe they’re likely to work, we encourage going through them step by step. If one of the first troubleshooting methods is effective, you will be able to save a significant amount of time and stress and have the need to contact support.

First Method – Make Sure That the Time and Date are Set Correctly

One of the most common and often overlooked reasons for Windows code 0x80070057 error is incorrect system time and date configuration. By carrying out the following procedures, you may ensure that the date and time settings on your computer are accurate:

  1. Hold down the “Windows” key and press the letter “R,” and type in “control” in the run command window.
control panel
  1. In the Control Panel, click on “Date and Time.” In the Date and Time window, click “Internet Time.”
change the date and time
  1. In the next window, click on “Change Settings,” put a check on “Synchronize with an Internet time server,” and type in “” Click “Update Now” and click “OK.” Restart your computer and run the Windows Update tool to confirm if the issue has been fixed.
synchronize with internet time server
  1. It is critical to ensure that your system is up to date to ensure that your computer functions smoothly. The above methods are the most effective for completely resolving error 0x80070057.

Second Method – Perform an SFC (Windows File Checker) Scan

The Windows System File checker is a built-in utility that scans for any missing or damaged system files. The SFC checks the integrity of all secure Windows system files and replaces outdated, corrupted, or edited ones with updated copies. This procedure may be used to repair corrupt files and Windows update components that cause the Windows error 0x80070057.

  1. Press the “Windows” + “R” keys and type “cmd” in the run command line. Hold both the “ctrl and shift” keys together and hit enter. Click “OK” on the next window to grant administrator permissions.
control find cmd
  1. Type “sfc /scannow” in the command prompt window and hit enter. System File Checker will now check for corrupted Windows files. Wait for the SFC to complete the scan and restart the computer. Once done, run the Windows Update tool to check if the issue has been fixed.
sfc scannow
  1. Once the scan is complete, make sure to restart your computer.

Recommended: Fortect System Repair Tool – Fix Errors & Speed Up Windows Automatically

Third Method – Perform a Deployment Image Servicing and Management Tool (DISM) Scan

In addition to scanning and repairing Windows images, the DISM program may also change Windows installation media which, if corrupt, can also cause the Windows error 0x80070057.

  1. Hold down the “Windows” key and press “R,” and type “cmd” in the run command line. Hold both the “ctrl and shift” keys together and press enter. Click “OK” on the next window to grant administrator permissions and open Command Prompt.
control find cmd
  1. The command prompt window will open, type in the following command: “DISM.exe /Online /Cleanup-image /Restorehealth” and then hit “enter.”
dism restorehealth
  1. The DISM utility will start scanning and fixing any errors. However, if the DISM cannot acquire files from the internet, try to use the installation DVD or bootable USB drive. Insert the media and type the following commands: DISM.exe/Online /Cleanup-Image /RestoreHealth /Source:C:RepairSourceWindows /LimitAccess

Note: Replace “C:RepairSourceWindows” with the path of your media device

Fourth Method – Run the Windows Update Troubleshooter

As mentioned, Windows error 0x80070057 may manifest when you try to update files or upgrade your Operating System. To fix this, we suggest running the Windows Update Troubleshooter.

The troubleshooter is a built-in tool of Windows 10 that you may use to resolve issues with Windows updates. This program was created to diagnose and fix various computer issues quickly, and this procedure should always be used first when dealing with Windows Update issues.

  1. Press the “Windows” key on your keyboard and press “R.” This will open a small window where you can type “control update” in the run command window.
run control update
  1. When a new window opens, click “Troubleshoot” and “Additional Troubleshooters.”
additional troubleshooter option
  1. Next, click “Windows Update” and “Run the Troubleshooter.”
run windows update troubleshooter
  1. At this point, the troubleshooter will automatically scan and fix errors in your PC. Once done, you can reboot and check if you are experiencing the same error.
windows troubleshooter complete
  1. After the detected issues have been fixed, restart your computer and see if the error has been fixed.

Fifth Method – Run the Windows Update

You should do so if you are experiencing Windows error 0x80070057 and have not checked for Windows Updates. This can be fixed by using the Windows Update Tool.

You may fix the Windows error 0x80070057 by downloading the newest bug patches, improvements, and virus definitions by updating your Operating System.

  1. Press the “Windows” key on your keyboard and press “R” to bring up the run line command type in “control update,” and press enter.
run control update
  1. Click on “Check for Updates” in the Windows Update window. If no updates are available, you should get a message saying, “You’re Up to Date.”
check updates
  1. If the Windows Update Tool finds a new update, let it install and wait for it to complete. You may be required to restart your computer for it to install.
downloading windows updates

Sixth Method – Run the Check Disk Scan

Apart from damaged or incomplete application files, this Windows error can also be caused by disk or storage issues. Check Disk is a utility in Windows that scans for and fixes disk issues that can cause system issues.

  1. From the File Explorer, open This PC and locate your Local Disk C. It’s generally called the Windows Drive, where the files and add-ins are stored.
  2. Left-click on the C drive and click on Properties.
open disk properties
  1. Head to the Tools section and press the Check dialog box under Error Checking.
drive error checking
  1. You can repeat this process for other drives as well. However, if this doesn’t repair your C program files, it won’t work for the others either.

Seventh Method – Perform a System Restore

Using System Restore, you restore your computer to a point where it was functioning correctly before the problem occurred. This includes everything installed, downloaded, and changed before Windows error 0x80070057 appeared.

  1. Click on the “Windows” icon on your desktop’s bottom left corner. Hold down the “shift” key on your keyboard and click on the “restart” icon.
restart computer
  1. Your computer will then reboot, and you will see the Advanced Startup Options. Click on “Troubleshoot” and click “System Restore.”
select system restore in advanced options
  1. After clicking on System Restore, you will be asked to choose your username. You have to follow the prompts and select the system restore point when your computer is completely working by this time. Click “Next” and wait for the restore process to complete. In this process, your computer may restart several times, and once it is complete, check if the issue has finally been fixed.

Conclusion: Tips for Resolving the Windows 0x80070057 Errors

Windows error 0x80070057 can be frustrating, but it is possible to fix it by following the steps outlined in this guide. Some potential solutions include checking for updates, running the Windows troubleshooter, and restoring the system to an earlier point.

If these methods do not work, more advanced troubleshooting techniques may be necessary, such as repairing the system files or reinstalling the operating system. It is always a good idea to ensure you have backed up your important data before attempting more advanced fixes. With patience and persistence, you can resolve the error and get your system back up and running smoothly.

Frequently Asked Questions about 0x80070057

How to run windows update cleanup?

To run the Windows Update Cleanup tool, open the Start menu and type “disk cleanup” into the search bar. Then, select “Disk Cleanup” from the list of results. Click on the “Clean up system files” button in the Disk Cleanup window. In the next window, select the checkbox next to “Windows Update Cleanup” and click the “OK” button. The tool will then delete outdated Windows updates from your system, freeing up space on your hard drive.

What to do when Windows update fails?

If the Windows update process fails, one potential solution is to try resetting the Windows update repository. This can help resolve any issues with the update process and get it back on track. To reset the repository, you can try running the Windows Update troubleshooter or manually downloading and installing the update from the Microsoft Update Catalog website. If these methods don’t work, you may need further assistance from Microsoft or a professional IT support team. It is important to regularly check for and install updates to keep your system running smoothly and securely.

Sed Galope
Meet the author

Sedfrey is an experienced writer and editor. He's also a PC hardware and gaming enthusiast. In his spare time, he enjoys reading about the latest innovations in the PC market and finding fixes to hardware and software errors.