How to Fix the Internet Connection Error “No Internet, Secured”

When there is an issue with wireless networking, the “no internet, secured” connection warning is one of the most common errors on Windows devices. Most users are perplexed by this mistake because they know they are connected to their Wi-Fi router but have no access to the internet.

Nothing will load in your web browser if you try to use it. Let’s look at the error message “no internet, secured,” which implies how to solve it and what causes it.

You’ll notice a small yellow triangle above the internet symbol if you hover your cursor over your Wi-Fi icon in the system tray. When you hover your cursor over this, a little tooltip with the message “no internet, secured” appears.

This error message indicates that you are not gaining internet access while connected to your Wi-Fi name or network over a secure connection. It could also signify that your internet connection is entirely unavailable.

What Causes the Internet Connection Error “No Internet, Secured”

Changing your network connection setup settings is the typical cause of the “no internet, secured” connection issue. The latest updates can be accidentally modified or erroneously set just by downloading the latest updates. So, with that said, let’s fix the problem utilizing the troubleshooting methods listed below.

5 Troubleshooting Methods to Fix the Internet Connection Error “No Internet, Secured”

Forget the Wi-Fi Connection and Reconnect

One of the most straightforward solutions for the “no internet, secured” error message on our list is instructing your computer to forget your internet connection. This will let you re-establish the connection between your computer and the Wi-Fi network and see if the problem was caused by a problem with the Wi-Fi network’s routes.

1. Click on the Internet Icon on your system tray in the bottom right corner of your desktop.
2. You will see the list of Wi-Fi networks available in your location and the one you are connected to.
3. Right-click on the Wi-Fi network you are connected to and click “Forget.”

4. Once you have forgotten the Wi-Fi connection, reconnect to it again and check if the “no internet, secured” error message has been fixed.

Disable the VPN

A VPN may include a built-in safety mechanism that will stop you from connecting to the internet if the VPN server dies or goes down.

Disable the VPN service by deactivating its operation and then rejoin your internet to determine if this is the cause of the “no internet, secured” connection warning. To disconnect, locate the VPN in the VPN settings and stop it with a right-click, or go to the VPN part of your Windows settings and turn it off. If you can connect to the internet, the problem would be with the VPN.

1. Open the Windows settings by simultaneously holding down the “Windows” + “I” keys.

2. Click on “Network & Internet” in the Windows Settings window.

3. Tick all the options under VPN Advanced Options off and remove any VPN Connections.

4. Reconnect to your Wi-Fi network and see if the issue has been fixed.

Run the Internet Connection Troubleshooter

You can automatically fix any issues with your internet by using the Internet Connection troubleshooter.

1. Open the Windows settings by simultaneously holding down the “Windows” + “I” keys.

2. Click on “Update & Security.”

3. Click on “Troubleshoot” in the left pane and click “Additional troubleshooters.”

4. Under additional troubleshooters, click on “Internet Connections” and “Run the Troubleshooter.”

5. The troubleshooter will then scan for any issues and will present any fixes.

Recommended: Fortect System Repair Tool – Fix Errors & Speed Up Windows Automatically

Reset the Network Configuration

This very straightforward technological solution will necessitate the use of the command prompt. With this approach, you’re releasing and renewing your IP address and flushing your DNS cache.

1. Hold down the “windows” key and press “R,” and type “cmd” in the run command line. Hold the “ctrl and shift” keys together and press enter. Click “OK” on the next window to grant administrator permissions.

2. Type in the following commands in the Command Prompt and press enter every after the command:

• netsh winsock reset
• netsh int ip reset
• ipconfig /release
• ipconfig /renew
• ipconfig /flushdns

3. Type in “exit” in the command prompt, press “enter,” and restart your computer once you run these commands. Check to see whether the “no internet, secured” issue still occurs.

Update Your Network Driver

Drivers who are out of date are known to create many problems. Make sure that your network adapter is up to date to ensure it isn’t faulty.

1. Press the “Windows” and “R” keys and type in “devmgmt.msc” in the run command line, and press enter.

2. In the list of devices, expand “Network Adapters,” right-click on your Wi-Fi adapter, and click “Update Driver.”

3. Select “Search Automatically for Drivers” and follow the subsequent prompts to install the new driver for your Wi-Fi adapter completely.

4. You may also check the manufacturer’s website for the latest driver of your Wi-Fi adapter to get the latest driver.

Wrap Up

The “no internet, secured” connection should be resolved when you’ve completed all of these steps, and you’ll be able to go online and use the internet. If the problem remains after troubleshooting, consider power cycling or resetting your router to see a hardware issue.

Try an alternative Wi-Fi network or connect through an ethernet cable and compare the results if this doesn’t work. You should also check with your Internet Service Provider if there’s any internet outage in your area.