[Solved] How to Fix UpdateService_Inst_2.6.4.9.exe Errors

Recommended: Use Fortect System Repair to repair UpdateService_Inst_2.6.4.9.exe errors. This repair tool has been proven to identify and fix errors and other Windows problems with high efficiency. Download Fortect here.

Download Now
Fortect System Repair
Filename
UpdateService_Inst_2.6.4.9.exe
Version
Filesize
2.57 MB
Category
Generic
MD5
4183ea9dda161914dbd765b505bf26a9
SHA1
9342ee3edbd7d3ad803ca4850456cfa1f80abb63
SHA256
252da15714d0ba1eb22818e5fb2fc11f49b361e6e0b14f2fc7bd8208478ea7c3
CRC32
13633410

Have you ever encountered an .exe file that just won't cooperate? You're not alone. One common .exe file is the UpdateService_Inst_2.6.4.9.exe associated with the Update Service by Sony Ericsson.

If you're experiencing errors or suspect malware, this article will guide you through troubleshooting methods and uninstalling the software. Let's get your system back on track!

File Problem - UpdateService_Inst_2.6.4.9.exe
There was an error loading UpdateService_Inst_2.6.4.9.exe. Please check your system and try again.

Common UpdateService_Inst_2.6.4.9.exe Errors on Windows

Encountering errors associated with UpdateService_Inst_2.6.4.9.exe can be frustrating. These errors may vary in nature and can surface due to different reasons, such as software conflicts, outdated drivers, or even malware infections. Below, we've outlined the most commonly reported errors linked to UpdateService_Inst_2.6.4.9.exe, to aid in understanding and potentially resolving the issues at hand.

  • UpdateService_Inst_2.6.4.9.exe - System Error: This error is usually associated with missing or corrupted system files required by UpdateService_Inst_2.6.4.9.exe.
  • UpdateService_Inst_2.6.4.9.exe Application Error: This generic error can occur due to various reasons like corrupt files, bad sectors on a hard drive, or insufficient system resources.
  • Missing UpdateService_Inst_2.6.4.9.exe File: This error message indicates that the system cannot find the requested executable file. This could occur because UpdateService_Inst_2.6.4.9.exe was deleted, moved, or the file path specified is not accurate.
  • Application Not Found: This error is displayed when the system is unable to locate the required application. This can happen because the application has been moved, deleted, or the file path is incorrect.
  • Unable to Start Correctly (0xc000007b): This warning is shown when the application fails to start as it should, typically caused by an inconsistency between the 32-bit and 64-bit versions of the application and the Windows operating system.

File Analysis: Is UpdateService_Inst_2.6.4.9.exe a Virus?

The file named UpdateService_Inst_2.6.4.9.exe has successfully passed tests from various virus detection tools with no flagged security issues. This is certainly good news as it minimizes the risk to your computer's overall health and performance.

Maintaining Security

However, even with such reassuring results, not letting your guard down is important. Regular system updates and routine security scans are pivotal in maintaining your computer's security and operational effectiveness. This way, you can continue to confidently use UpdateService_Inst_2.6.4.9.exe as part of your daily computer activities.

How to Remove UpdateService_Inst_2.6.4.9.exe

If it becomes necessary to eliminate the UpdateService_Inst_2.6.4.9.exe file from your system, kindly follow the steps provided below. As with any modification to system files, it's crucial to proceed with care to avoid unintentional changes that may cause unpredicted system responses.

  1. Locate the File: Start by finding UpdateService_Inst_2.6.4.9.exe on your system. You can do this by using the search feature in your File Explorer.

  2. Protect Your Data: Always have a backup of important data before you make changes to your system files. This keeps your important files safe, even if something goes wrong.

  3. Remove the File: Once you've found UpdateService_Inst_2.6.4.9.exe, remove it by right-clicking on the file and choosing Delete. This moves the file to your Recycle Bin.

  4. Complete the Deletion: To get rid of UpdateService_Inst_2.6.4.9.exe fully, you must empty your Recycle Bin. Right-click on the Recycle Bin icon and choose Empty Recycle Bin.

  5. Check Your System: After you've removed the file, run a full system scan using a trusted antivirus tool. This helps ensure no harmful bits of the file are left behind.

Note: If UpdateService_Inst_2.6.4.9.exe is related to a specific program, deleting it could cause the program to stop working correctly. If you notice any issues after removing the file, you might need to reinstall the software, or you could contact a tech professional.

Repair UpdateService_Inst_2.6.4.9.exe Error Automatically

Featured Guide
Repair UpdateService_Inst_2.6.4.9.exe Error Automatically Thumbnail
Difficulty
Easy
Steps
9
Time Required
3 minutes
Sections
3
Description

In this guide, we will fix UpdateService_Inst_2.6.4.9.exe and other EXE errors automatically.

Step 1: Download Fortect (AUTOMATIC FIX)

Step 1: Download Fortect (AUTOMATIC FIX) Thumbnail
  1. Click the Download Fortect button.

  2. Save the Fortect setup file to your device.

Step 2: Install Fortect

Step 2: Install Fortect Thumbnail
  1. Locate and double-click the downloaded setup file.

  2. Follow the on-screen instructions to install Fortect.

Step 3: Run Fortect

Step 3: Run Fortect Thumbnail
  1. Finish the installation and open Fortect.

  2. Select the System Scan option.

  3. Allow Fortect to scan your system for errors.

  4. Review the scan results once completed.

  5. Click on Fix Errors to start the repair process.

Run the Windows Memory Diagnostic Tool

Run the Windows Memory Diagnostic Tool Thumbnail
Difficulty
Advanced
Steps
6
Time Required
15 minutes
Sections
5
Description

How to run a Windows Memory Diagnostic test to check for UpdateService_Inst_2.6.4.9.exe errors related to memory issues.

Step 1: Open Windows Memory Diagnostic

Step 1: Open Windows Memory Diagnostic Thumbnail
  1. Press the Windows key.

  2. Type Windows Memory Diagnostic in the search bar and press Enter.

Step 2: Start the Diagnostic Process

Step 2: Start the Diagnostic Process Thumbnail
  1. In the Windows Memory Diagnostic window, click on Restart now and check for problems (recommended).

Step 3: Wait for the Diagnostic to Complete

Step 3: Wait for the Diagnostic to Complete Thumbnail
  1. Your computer will restart and the memory diagnostic will run automatically. It might take some time.

Step 4: Check the Results

Step 4: Check the Results Thumbnail
  1. After the diagnostic, your computer will restart again. You can check the results in the notification area on your desktop.

Step 5: Check if the Problem is Solved

Step 5: Check if the Problem is Solved Thumbnail
  1. After the memory diagnostic, check if the UpdateService_Inst_2.6.4.9.exe problem persists.

Perform a Repair Install of Windows

Perform a Repair Install of Windows Thumbnail
Difficulty
Advanced
Steps
9
Time Required
45 minutes
Sections
5
Description

How to perform a repair install of Windows. A repair installation resets all Windows system files.

Step 1: Create a Windows 10 Installation Media

Step 1: Create a Windows 10 Installation Media Thumbnail
  1. Go to the Microsoft website and download the Windows 10 Media Creation Tool.

  2. Run the tool and select Create installation media for another PC.

  3. Follow the prompts to create a bootable USB drive or ISO file.

Step 2: Start the Repair Install

Step 2: Start the Repair Install Thumbnail
  1. Insert the Windows 10 installation media you created into your PC and run setup.exe.

  2. Follow the prompts until you get to the Ready to install screen.

Step 3: Choose the Right Install Option

Step 3: Choose the Right Install Option Thumbnail
  1. On the Ready to install screen, make sure Keep personal files and apps is selected.

  2. Click Install to start the repair install.

Step 4: Complete the Installation

Step 4: Complete the Installation Thumbnail
  1. Your computer will restart several times during the installation. Make sure not to turn off your computer during this process.

Step 5: Check if the Problem is Solved

Step 5: Check if the Problem is Solved Thumbnail
  1. After the installation, check if the UpdateService_Inst_2.6.4.9.exe problem persists.

Software that installs UpdateService_Inst_2.6.4.9.exe

Software File MD5 File Version
0.5.0.0
Files related to UpdateService_Inst_2.6.4.9.exe
File Type Filename MD5
EXE
0190b8a1cefd5423e4637f869908bdeb
EXE
5ab8231ec31cb8c49a39313d2f322381
DLL
bbe451e90e0843c39a591f60239e9311
EXE
faf3b08a46e2243c076a87f5262004eb
DLL
946f9d1a89ed5b282150a099997b0e1b
DLL
dc8966cbd4c9ee3912c25933dfde740b