StatsViewer.exe Fix - Windows 11, 10, 8, 7, Vista & XP

Recommended: Use Fortect System Repair to repair StatsViewer.exe errors. This repair tool has been proven to identify and fix errors and other Windows problems with high efficiency. Download Fortect here.

Download Now
Fortect System Repair
Filename
StatsViewer.exe
Version
Filesize
38.40 KB
Category
Generic
MD5
3f4a78e1f898b3474db34e0e813ce481
SHA1
1964f56b9835484366d1d0318dc5461bd69fe2da
SHA256
e140e6569720162cfdc9e44d20a01c3ee69352c9d6603ee421aee0fdb16f6b1c
CRC32
35394128

If you're experiencing issues with the StatsViewer.exe file linked to the Outlast software by Red Barrels, you're not alone. Many users encounter common errors and difficulties with exe files. In this article, I'll guide you through troubleshooting methods for resolving these problems, addressing any malware concerns, and providing tips on uninstalling the related software.

Let's get started on solving these issues and getting your system running smoothly again.

Critical Issue - StatsViewer.exe
Missing StatsViewer.exe is causing the program startup issue. Try a reinstallation for a solution.

Common StatsViewer.exe Errors on Windows

Confronting errors linked to StatsViewer.exe can be a daunting task due to the diversity of underlying causes, which might include software incompatibility, obsolete drivers, or even malware presence. In the section below, we've enumerated the most frequently encountered errors related to StatsViewer.exe in order to assist you in comprehending and potentially rectifying the issues.

  • Access is Denied: This warning pops up when the system denies access to a particular file or resource. Reasons could include limited user permissions, complications with file ownership, or strict file permissions.
  • StatsViewer.exe - System Error: This warning is displayed when the system experiences a problem due to an executable file. This could occur because of software interference, corruption of system files, or lack of necessary system resources.
  • Unable to Start Correctly (0xc000007b): This alert appears when the application cannot initiate correctly, often resulting from a mismatch between the Windows version and the application regarding 32-bit and 64-bit configurations.
  • StatsViewer.exe - Bad Image Error:: This warning appears when Windows is unable to operate StatsViewer.exe, either because the file is damaged, or the corresponding DLL file is missing or corrupted.
  • Application Not Found: This message occurs when the system can't find the necessary application. Possible reasons could be the application being deleted, moved, or an inaccurately specified file path.

File Analysis: Is StatsViewer.exe a Virus?

Scanning Results

The file in question, StatsViewer.exe, has been thoroughly scanned and shows no signs of virus detection, as evidenced by the clean results from 0 distinct virus scanners. It's always reassuring to encounter files with no known associated threats, as these pose a lesser risk to your system's integrity and performance.

Application Association

This file is part of a software application, suggesting that its functions are primarily tied to the operations of this software. However, as with all executable files, it is essential to remain vigilant, ensuring it continues behaving as expected.

Maintaining a Healthy Computing Environment

A healthy computing environment is achieved through attentive management and proactive protective measures. Keep your system's defenses updated and periodically scan files to maintain your computer's security and performance.

  • Stay vigilant with executable files
  • Update your system's defenses regularly
  • Periodically scan files for potential threats

How to Remove StatsViewer.exe

Should you need to remove the StatsViewer.exe file from your system, please proceed with the following steps. As always, exercise caution when modifying system files, as inadvertent changes can sometimes lead to unexpected system behavior.

  1. Identify the file location: The first step is to find where StatsViewer.exe resides on your computer. You can do this by right-clicking the file (if visible) and choosing Properties or searching for it in the File Explorer.

  2. Backup your data: Before making any changes, ensure you have a backup of important data. This way, if something goes wrong, you can restore your data.

  3. Delete the file: Once you've located StatsViewer.exe, right-click on it and select Delete. This will move the file to the Recycle Bin.

  4. Empty the Recycle Bin: After deleting StatsViewer.exe, don't forget to empty the Recycle Bin to remove the file from your system completely. Right-click on the Recycle Bin and select Empty Recycle Bin.

  5. Scan your system: After removing the file, running a full system scan with a trusted antivirus tool is a good idea. This will help ensure no leftover file pieces or other potential threats.

Note: Remember, if StatsViewer.exe is part of a sprogram, removing this file may affect the application's functionality. If issues arise after the deletion, consider reinstalling the software or seek assistance from a tech professional.

Repair StatsViewer.exe Error Automatically

Featured Guide
Repair StatsViewer.exe Error Automatically Thumbnail
Difficulty
Easy
Steps
9
Time Required
3 minutes
Sections
3
Description

In this guide, we will fix StatsViewer.exe and other EXE errors automatically.

Step 1: Download Fortect (AUTOMATIC FIX)

Step 1: Download Fortect (AUTOMATIC FIX) Thumbnail
  1. Click the Download Fortect button.

  2. Save the Fortect setup file to your device.

Step 2: Install Fortect

Step 2: Install Fortect Thumbnail
  1. Locate and double-click the downloaded setup file.

  2. Follow the on-screen instructions to install Fortect.

Step 3: Run Fortect

Step 3: Run Fortect Thumbnail
  1. Finish the installation and open Fortect.

  2. Select the System Scan option.

  3. Allow Fortect to scan your system for errors.

  4. Review the scan results once completed.

  5. Click on Fix Errors to start the repair process.

Perform a Repair Install of Windows

Perform a Repair Install of Windows Thumbnail
Difficulty
Advanced
Steps
9
Time Required
45 minutes
Sections
5
Description

How to perform a repair install of Windows. A repair installation resets all Windows system files.

Step 1: Create a Windows 10 Installation Media

Step 1: Create a Windows 10 Installation Media Thumbnail
  1. Go to the Microsoft website and download the Windows 10 Media Creation Tool.

  2. Run the tool and select Create installation media for another PC.

  3. Follow the prompts to create a bootable USB drive or ISO file.

Step 2: Start the Repair Install

Step 2: Start the Repair Install Thumbnail
  1. Insert the Windows 10 installation media you created into your PC and run setup.exe.

  2. Follow the prompts until you get to the Ready to install screen.

Step 3: Choose the Right Install Option

Step 3: Choose the Right Install Option Thumbnail
  1. On the Ready to install screen, make sure Keep personal files and apps is selected.

  2. Click Install to start the repair install.

Step 4: Complete the Installation

Step 4: Complete the Installation Thumbnail
  1. Your computer will restart several times during the installation. Make sure not to turn off your computer during this process.

Step 5: Check if the Problem is Solved

Step 5: Check if the Problem is Solved Thumbnail
  1. After the installation, check if the StatsViewer.exe problem persists.

Run the Windows Check Disk Utility

Run the Windows Check Disk Utility Thumbnail
Difficulty
Intermediate
Steps
7
Time Required
10 minutes
Sections
4
Description

How to use the Windows Check Disk Utility. Scans your disk for StatsViewer.exe errors and automatically fix them.

Step 1: Open the Command Prompt

Step 1: Open the Command Prompt Thumbnail
  1. Press the Windows key.

  2. Type Command Prompt in the search bar and press Enter.

  3. Right-click on Command Prompt and select Run as administrator.

Step 2: Run Check Disk Utility

Step 2: Run Check Disk Utility Thumbnail
  1. In the Command Prompt window, type chkdsk /f and press Enter.

  2. If the system reports that it cannot run the check because the disk is in use, type Y and press Enter to schedule the check for the next system restart.

Step 3: Restart Your Computer

Step 3: Restart Your Computer Thumbnail
  1. If you had to schedule the check, restart your computer for the check to be performed.

Step 4: Check if the Problem is Solved

Step 4: Check if the Problem is Solved Thumbnail
  1. After the check (and restart, if necessary), check if the StatsViewer.exe problem persists.

Software that installs StatsViewer.exe

Software File MD5 File Version
1.0.11774....
ef4f263da1e224171c67b48d43f1aa25
df40877bbe13983bee9329f03f359c8f
1bfdeee6c93c544b3173557353e45f82
ed1a0d53e18ad2c1644588f45ebffe8d
66405797f6fd902c3a8d73febf9a7af3 ...
df40877bbe13983bee9329f03f359c8f
c0671d8660ace4afea8433cc23a6fdc6
af02b0126b04337a4c50575244879588
c0671d8660ace4afea8433cc23a6fdc6
Files related to StatsViewer.exe
File Type Filename MD5
DLL
08e7ce77f6dc7f8a9ea4fe2b566634e3
DLL
90b20a2e217cb4d375994b430cf55e24
DLL
fbdf611b534ba5dcfb007b75eda1ec7b
DLL
9147a18d3a0a680320a909a85d5191a7
EXE
fb10f6aa62403354f257d1e23644fbcd
EXE
93eda9104cd804364fdfd33fe45a9743
DLL
14fbb03fdba464b788d8c18e725c5beb
EXE
441bcae670f4a7f4430cc26253583f4b
EXE
0f7d033bdb0f9fb991e4def290129506
DLL
113255ad7a36f97f7a76ab501d4b6a73