How to fix Ethernet Doesn’t have a Valid IP Configuration in Windows 10

IP address allows computers to communicate with each other using the internet. It serves as Identification for your device and it is unique.

If you are here, I am thinking that you have encountered an error message saying “Ethernet doesn’t have a valid IP Configuration”. This means that your system is not receiving proper IP configuration from DHCP (Dynamic Host Configuration Protocol).

This error is usually due to improper installation of network drivers, outdated drivers; improper network configuration or your ISP is encountering issues.

To help you in resolving this issue, here are some ways you can do to fix Ethernet doesn’t have a valid IP Configuration.

Method 1: Restart your computer/modem

The simplest thing you can do to fix the issue is by restarting your computer. Before restarting your computer save all files you are working on and shut down Windows.

To restart your modems follow these steps:

Step 1: Press the power switch on your modem

Step 2: Unplug the router

Step 3: Wait for at least 5 minutes before plugging in your modem

Step 4: Plugin your device and turn it on

See if this solution fixed Ethernet doesn’t have a valid IP configuration error. If the issue is still there proceed to the next method.

Method 2: Use Third-Party System Repair Tool (RESTORO)

Restoro is a program that analyzes your computer and automatically repairs issues on your PC that may cause the Ethernet doesn’t have a valid IP configuration error.

Follow the steps below on how to download and use Restoro on your computer.

NOTE: These steps will require you to temporarily deactivate your anti-virus to prevent it from interfering with Restoro.

Step 1: Download and Install Restoro for free

Step 2: Accept the license terms agreement by checking the “I Accept the EULA and Privacy Policy” to continue.

Step 3: After installing restoro, it will automatically scan your computer for the first time.

Restoro

Step 4: You can view the details of the scan by expanding the “Details” tab.

Step 5: To fix the issues found, expand the “Recommendation” tab and choose between “Clean” and “Ignore”

Step 6: Click on “Clean Now” at the bottom part of the program to begin fixing the issue.

Most of the time Restoro will fix the problem on Ethernet doesn’t have a valid IP configuration error. But if the issue is still present proceed to the next method.

Method 3: Update Network Drivers and Windows

Step 1:  Press the Windows key on your keyboard and click on the “Settings” icon.

Step 2:  Select on “Windows Update” on the side menu

Windows Update

Step 3: Wait for the system to check for updates and then download it.

Method 4: Reset TCP/IP using Command Prompt

If trying the methods above doesn’t work, doing a TCP/IP reset using netshell command might fix the issue with your E.

To do these kindly see the steps below:

Step 1: Press Windows key + X and choose Command Prompt (Admin) from the menu

Command Prompt (Admin)

Step 2: Enter these lines on the Command prompt netsh int ip reset and press enter.

netsh int ip reset

Step 3: After the process is done, close Command Prompt and Reboot your Computer.

After executing the steps above, try to check if the issue is resolved.

Method 5: Configure your IP address manually

If resetting your TCP/IP doesn’t fix the error. Try configuring the TCP/IP settings manually.

Follow the steps below to do it:

Step 1: Press Windows key + R

Step 2: Type ncpa.cpl and click OK

ncpa.cpl

Step 3: A menu of your available Network Connections will appear and select the network you are currently connected

Step 4: Right Click on your current connection and select properties

Wi-Fi Properties

Step 5: Find Internet Protocol Version 4 (TCP/IPv4) and click properties

Internet Protocol Version 4 (TCP/IPv4) Properties

Step 6: A pop up window will appear click on Use the following IP Address and enter the following

IP Address : 192.168.1.24 (the last two digits could be any number from 10-244)

Subnetmask: 255.255.255.0

Default Gateway: 192.168.1.1

For the DNS server, you can use Google’s DNS server which is

Preferred DNS server: 8.8.8.8

Alternate DNS server: 8.8.4.4

 

**See detailed picture below**

IP and DNS Address

Step 7: Click ok to apply the settings and reboot your computer

After rebooting your computer check if the issue is resolved.

Faulty Hardware

After doing the steps above, try to bring your computer or laptop to a service center. The issue could be due to a broken network adapter. In this case the only solution is to replace the network adapter.

Your ISP is having issues

Most of the time the above methods will fix the issue on Ethernet doesn’t have a valid IP Configuration.

If you have tried all the methods above and the issue is not yet resolved, the problem could be on your Internet Service provider. Report the issue to their customer support to assist you in resolving the issue.